Important pre-settingsIn some cases, you'll need to allow access on your firewall to your controller or access-point to the following IP addresses:18.116.30.58Make sure you have the following ports opened:HTTPS: 443HTTP: 80Access should be granted for the ...
Log in to your Huawei CloudCampus (Agile) web interface. At the top, click on Configuration > Device Group Configuration.Click on your chosen Device Group to be taken to the settings page. On the left, click Advanced Configuration > SSID and click C ...
PrerequisitesThis guide applies to the version 5.0.0 or later of the Controller.The following products are supported:SCGvSCGSZvSZvSZ-DDevice configurationConfiguring Wireless LANs Group:In the panel go to the following directory: Network->Wir ...
The configuration procedure has been performed and tested on a cnPilot E400 running the firmware version 2.5.1-b2.The following access point models are supported:E400ePMP1000E500Before integrating the controller with Aiwifi, it is necessary that the contr ...
Our UniFi integration works by having a constant connection to your UniFi controller via API. If you are having problems, make sure that...Your controller is publically accessible from outside of your network, you should be able to access it from outside ...
Procedure to configure Mirkotik Hotspot for AiWiFiThis document will give a details information that how to create Mikrotik hotspot for AiWiFi Captive login. To configure you need following tools and hardware,WinboxMikrotik WiFi routerlogin.html fileLet’s ...
1) Ingresar a la consola local con las credenciales que están impresas en las etiquetasdel router:Nota 1: Requisitos mínimos para un correcto funcionamiento: Versión de firmware Wi0120-0.1.5-240704-153827Nota 2: Cabe mencionar que esta función está dispon ...
This article applies to all devices belonging to the MR series PrerequisitesRequest the following access to the Meraki Support team the following access in case you do not see the information or steps on your Meraki Portal:Splash Page: https://docume ...
Procedure.To perform the setup of the device from factory settings, we must connect via Ethernet wire (connected from the LAN port to the PC) or through the default WI-FI network. This can be validated on the rear label of the Teltonika device. ...
Pre-requisitesFirstly, your Access Point (GWN76xx) and your computer should be already connected to same local network by Wi-Fi.Captive Portal Setup1. Set up Policy list, click on Captive Portal, Policy list and +Add:2. Set up the next steps on ...
Pre-requisitesYour Access Point and Controller should be already paired and working together for a simple WiFi Network.Captive Portal Setup1. Go to “Configuration” then “Wireless Networks” and click con “+ Create New Wireless Network”2. Setup a name for y ...
1. Install DD-WRT (you can find the compatible devices here: https://dd-wrt.com/support/router-database/)2. Access to the device through the web interface Enter URL to your web browser:192.168.1.1Default user:adminDefault password:admin3. ...
This guide considers your Router is already connected to internet through LAN port. Follow your device instructions in order to setup your ssid. 1. Connect to your GL-iNet router and open the browser to visit: http://192.168.8.1/2. Turn on the G ...
Pre-requisitesFirstly, you need to have an account, then your Access Point (GWN76xx) should be already added on GWN.Cloud Captive Portal Setup1. Set up Radius Profile, go to ”Settings” then “Profiles” and click on “Radius” and “+Add”Name: “Radius_0”. ...
1. This considers you will use your main WiFi network on the Starship 4122. The setup considers it is a factory default firmware. 3. Login to your admin panel. 4. Setup your WiFi network and disable the security on your WiFi to remove passwords. ...